Chelsio Communications Chelsio T5 User's Guide download pdf (Page 16)

Chapter I. Chelsio Unified Wire

Chelsio T5/T4 Unified Wire For Linux Page 16

 t4_perftune.sh: This shell script is to tune the system for higher performance. It

achieves it through modifying the IRQ-CPU binding. This script can also be used to

change Tx coalescing settings.

 t4-forward.sh: RFC2544 Forward test tuning script.

 uname_r: This file is used by chstatus script to verify if the Linux platform is

supported or not.

 wdload: UDP acceleration tool.

 wdunload: Used to unload all the loaded Chelsio drivers.

 bootcfg: This utility generates a default boot configuration file in binary format.

 chiscsi_set_affinity.sh: This shell script is used for mapping iSCSI Worker threads

to different CPUs.

 chelsio_adapter_config: This directory contains scripts and binaries needed to

configure Chelsio 40G Adapters.

Uboot: There are two sub-directories in the Uboot directory: OptionROM and LinuxDUD.

The OptionROM directory contains Unified Boot Option ROM image (cuwlbt4.bin) and a

Legacy Flash Utility (cfut4.exe), which can be used to flash Unified Boot Option ROM onto

Chelsio's T5 and T4 Converged Network Adapters (CNAs).

The LinuxDUD directory contains image (.img) files required to update drivers for Linux

(RHEL and SLES) distributions.

1.4.2. RPM package

The Chelsio Unified Wire RPM package consists of the following:

docs: The docs directory contains support documents i.e. README, Release Notes and

User’s Guide (this document) for the software.

scripts: Support scripts used by the Unified Wire Installer.

DRIVER-RPMS: RPM packages of Chelsio drivers.

OFED-RPMS: OFED RPM packages required to install iWARP driver.

install.py: Python script that installs the RPM package. See Software/Driver Installation

section for more information.

uninstall.py: Python script that uninstalls the RPM package. See Software/Driver

Uninstallation section for more information.

EULA: Chelsio’s End User License Agreement.

Uboot: There are two sub-directories in the Uboot directory: OptionROM and LinuxDUD.

The OptionROM directory contains Unified Boot Option ROM image (cuwlbt4.bin) and a

Legacy Flash Utility (cfut4.exe), which can be used to flash Unified Boot Option ROM onto

Chelsio's T5 and T4 Converged Network Adapters (CNAs).

The LinuxDUD directory contains image (.img) files required to update drivers for Linux

(RHEL and SLES) distributions.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 459 460

No comments

Chelsio Communications Chelsio T5 User's Guide Page 16